Site Notice | Privacy Policy | Downloads | Shop | Contact

Hawk pressure regulator units

WITH CYLINDER CONNECTION

Pressure regulator units for connection to an oxygen cylinder, with volume manometer and safety valve.
Includes a downstream KOLIBRI compact flowmeter for dosing the flow and an ejector with a vacuum gauge and fine-dosing valve.

The following accessories can be attached:
• Drainage system (recommended)
• Nebuliser or humidifier (disposable or reusable)

Questions?

Kim van Eijsden
+49 (0)40 / 73 93 57 - 44
E-Mail

  • Technical Data

    Pressure regulator unit

    Design: Spring-loaded membrane pressure regulator
    in accordance with DIN EN ISO 10524-1
    Brass, chrome-plated
    Medium: O2 - oxygen
    Inlet: Gas-specific hand connector in accordance with DIN 477-1
    Primary pressure: max. 20.000 kPa (P1)
    Outlet pressure: 450 kPa ± 50 kPa (P2)
    Flowrate: max. 80 l/min
    Manometer 0-31,500 kPa display

     

    Kolibri flowmeter

    Design: 10-stage compact flowmeter in accordance with DIN EN ISO 15002.
    POM adjusting ring. Brass housing, chrome-plated
    Outlet: 9/16“-18 UNF with hose nozzle. Suitable for connecting
    a reusable or disposable humidifier (e.g. RESPIFLO from Covidien)
    Flowrate: The flow can be adjusted step-wise between:
    0,5 / 1 / 1,5 / 2 / 3 / 4 / 6 / 8 / 12 / 15 l/min

     

    Ejector for vacuum generation

    Design: Vacuum generation using the ejector principle
    in acc. with DIN EN ISO 10079-3
    Brass, chrome-plated
    Outlet: 9/16“-18 UNF with vacuum nozzle 6mm
    Dimensions/weight
    (WxHxD):
    ca. 160 x 170 x 180 mm / ca. 1700 g
    Performance parameters: Adjustable between 0 and -90 kPa
    Suction Flowrate: min. 20 l/min at -90 kPa (± 10%)
    Consumption: max. 30 l/min at -90 kPa
  • Pressure regulator unit

    Kolibri suction + insufflation unit, cylinder connection

    O2: Suction unit + Kolibri flowmeter, for oxygen cylinder 500.046
GREGGERSEN NEWS