Site Notice | Privacy Policy | Downloads | Shop | Contact

Hawk pressure regulator unit

WITH BOTTLE CONNECTOR

Pressure regulator units for connection to an oxygen cylinder, with volume
manometer and safety valve.
Includes a tube flowmeter for dosing the flow and an ejector with a vacuum
gauge and fine-dosing valve.

The outlet has a 9/16“ thread for direct connection

The following accessories can be attached:
• Drainage system (recommended)
• Nebuliser or humidifier (disposable or reusable)

Questions?

Kim van Eijsden
+49 (0)40 / 73 93 57 - 44
E-Mail

  • Technical Data

    Pressure regulator unit

    Design: Spring-loaded membrane pressure regulator
    in accordance with DIN EN ISO 10524-1
    Brass, chrome-plated
    Medium: O2 - oxygen
    Inlet Gas-specific hand connector in accordance with DIN 477-1
    Primary pressure: max. 20.000 kPa (P1)
    Outlet pressure: 450 kPa ± 50 kPa (P2)
    Manometer: 0-31,500 kPa display
    Flowrate: max. 80 l/min

     

    Flowmeter

    Design: Röhren-Flowmeter gemäß DIN EN ISO 15002, druckkompensiert, inkl. Feinregulierventil
    Material: Brass, chrome-plated
    Outlet: 9/16" - 18 UNF thread
    Flowrate: 0 – 15 l/min
    Accuracy: ± 10 % full scale

     

    Ejector for vacuum generation

    Design: Vacuum generation using the ejector principle,
    in accordance with DIN EN ISO 10079-3
    Material: Brass, chrome-plated
    Outlet: 9/16“-18 UNF with vacuum nozzle 6mm
    Dimensions/weight
    (BxHxT):
    160 x 190 x 180 mm / ca. 1600 g
    Performance parameters: Adjustable between 0 and -90 kPa
    Consumption: max. 30 l/min at -90 kPa
    Suction flowrate: min. 20 l/min at -90 kPa (± 10%)
  • pressure regulator unit
    Hawk O2: Suction + tube flowmeter without humidifier,
    VAC: 0 to -90 kPa, flowrate: 0-15 l/min
    910.003
GREGGERSEN NEWS