Site Notice | Privacy Policy | Downloads | Shop | Contact

Swan Water Vacuum Regulator

VACUUM-DRIVEN

For continuous drainage and fine water-column regulation of vacuum; with in- tegrated control valve. Can be supplied as a plug-in device for direct coupling to a vacuum outlet or as a rail-mounted device, NIST housing inlet. The integrated control valve releases the vacuum flow to generate the required suction vacuum. When air bubbles become visible at the bottom end of the immersion tube the immersion tube vacuum setting is reached. If there is no vacuum, it can be gene- rated from compressed air using an ejector. See Skua Regulator Units.

Questions?

Kim van Eijsden
+49 (0)40 / 73 93 57 - 44
E-Mail

  • TECHNICAL DATA
    Design:Water vacuum gauge with immersion tube,
    Plexiglas water tubes,
    Regulator unit and caps made of chrome-plated brass
    Messing, verchromt
    Medium:Vacuum
    Inlet:Plug-in connector: acc. to DIN 13260-2 – gas type-specific
    Rail:NIST housing (gas type-specific acc. to DIN EN ISO 5359)
    Primary pressure:-4...-99 kPa (vacuum operation)
    Outlet:9/16-18 UNF with vacuum nozzle
    Suction:Continuously adjustable between 0 and -35/-50 cm H2O
    Suction flowrate:Minimum 10 l/min at -40 cm H2O
    Performance level depends on supply system pressure (approx. 1 cm H2O ? 1 mbar ? 0.1 kPa)
  • WATER VACUUM REGULATOR SWAN

    WATER VACUUM REGULATOR SWAN, VAC*

    Water Vacuum Regulator Swan, VAC, 0 to -3.5 kPa, plug-in device 904.908
    Water Vacuum Regulator Swan, VAC, 0 to -3.5 kPa, rail-mounted device without connector hose 902.694
    Water Vacuum Regulator Swan, VAC, 0 to -5 kPa, plug-in device 904.909
    Water Vacuum Regulator Swan, VAC, 0 to -5 kPa, rail-mounted device without connector hose 904.905


    *Connector hose, see product group ‘Accessories’

     

    ACCESSORIES REQUIRED FOR OPERATION USING A COMPRESSED AIR EJECTOR

    Vacuum connector hose, complete with screw joint , L: 0,5m 900.359
GREGGERSEN NEWS